Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Morii, Shiori; Yomogida, Takumi; Asai, Shiho*; Ouchi, Kazuki; Oka, Toshitaka; Kitatsuji, Yoshihiro
Bunseki Kagaku, 72(10.11), p.441 - 448, 2023/10
Rapid analytical method for the determination of Zr-93 in radioactive wastes has been developed. Laser ablation (LA)-ICP-MS was applied to the analysis of Zr isotopes in simulated high-level radioactive waste (HLW). Sample preparation time was dramatically reduced by using a DGA resin as the adsorbent for Zr. Direct quantification of Zr isotopes in this resin sample was carried out by LA-ICP-MS. Laser settings were optimized to obtain a reliable isotope ratio of the sample by LA-ICP-MS. Quantification of Zr isotopes in the simulated HLW solution by isotope dilution mass spectrometry (IDMS) was examined. The amount of Zr-90 in the sample obtained by IDMS corresponded to a value calculated from the given concentration of Zr in the sample within uncertainty. Thus, this method can be applied for the quantification of Zr-93 in radioactive wastes.
Hidaka, Akihide; Kawashima, Shigeto*; Kajino, Mizuo*
Journal of Nuclear Science and Technology, 60(7), p.743 - 758, 2023/07
Times Cited Count：2 Percentile：90.12(Nuclear Science & Technology)An accurate estimation of radionuclides released during the Fukushima accident is essential. Therefore, authors investigated Te release using the Unit emission-regression estimation method, in which the deposition distribution is weighted based on the hourly deposition obtained from mesoscale meteorological model calculations assuming Unit emissions. The previous study focused on confirming the applicability of this method. Subsequent examination revealed that if any part of the time when a release have occurred is missing from the estimated release period, the entire source term calculation will be distorted. Therefore, this study performed the recalculation by extending the estimation period to cover all major releases. Consequently, unspecified release events were clarified, and their correspondence to in-core events was confirmed. The 
Te release caused by Zr cladding complete oxidation can explain the regional dependence of the Te/
Cs ratio in the soil contamination map.
and Zr at precisely controlled high temperaturesShirasu, Noriko; Sato, Takumi; Suzuki, Akihiro*; Nagae, Yuji; Kurata, Masaki
Journal of Nuclear Science and Technology, 60(6), p.697 - 714, 2023/06
Times Cited Count：1 Percentile：72.91(Nuclear Science & Technology)Interaction tests between UO and Zr were performed at precisely controlled high temperatures between 1840 and 2000 
C to understand the interaction mechanism in detail. A Zr rod was inserted in a UO crucible and then heat-treated at a fixed temperature in Ar-gas flow for 10 min. After heating in the range of 1890 to 1930 C, the Zr rod was deformed to a round shape, in which the post-analysis detected the significant diffusion of U into the Zr region and the formation of a dominant 
-Zr(O) matrix and a small amount of U-Zr-O precipitates. The abrupt progress of liquefaction was observed in the sample heated at around 1940 C or higher. The higher oxygen concentration in the -Zr(O) matrix suppressed the liquefaction progress, due to the variation in the equilibrium state. The U-Zr-O melt formation progressed by the selective dissolution of Zr from the matrix, and the selective diffusion of U could occur via the U-Zr-O melt.
Ota, Hirokazu*; Ogata, Takanari*; Yamano, Hidemasa; Futagami, Satoshi; Shimada, Sadae*; Yamada, Yumi*
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 8 Pages, 2023/05
pellet in molten Zr claddingIto, Ayumi*; Yamashita, Susumu; Tasaki, Yudai; Kakiuchi, Kazuo; Kobayashi, Yoshinao*
Journal of Nuclear Science and Technology, 60(4), p.450 - 459, 2023/04
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)Kakiuchi, Kazuo; Amaya, Masaki; Udagawa, Yutaka
Journal of Nuclear Materials, 573, p.154110_1 - 154110_7, 2023/01
Times Cited Count：0 Percentile：0.01(Materials Science, Multidisciplinary)
Ni and Zr at 0.4, 1.3, 2.2, and 3.0 GeVTakeshita, Hayato*; Meigo, Shinichiro; Matsuda, Hiroki*; Iwamoto, Hiroki; Nakano, Keita; Watanabe, Yukinobu*; Maekawa, Fujio
Nuclear Instruments and Methods in Physics Research B, 527, p.17 - 27, 2022/09
Times Cited Count：3 Percentile：53.91(Instruments & Instrumentation)To improve accuracy of nuclear design of accelerator driven nuclear transmutation systems and so on, nuclide production cross sections on Ni and Zr were measured for GeV energy protons. The measured results were compared with PHITS calculations, JENDL/HE-2007 and so on.
Kakiuchi, Kazuo; Udagawa, Yutaka; Yamauchi, Akihiro*
JAEA-Research 2022-001, 21 Pages, 2022/06
JAEA-Research-2022-001.pdf:1.84MB
The primary cause of cladding embrittlement during loss-of-cool ant accident (LOCA) is the increase in oxygen concentration in the metallic layer and associated microstructural change due to oxidation. In the case of cladding high temperature rupture, inner surface oxidation by the steam ingress and the consequent increase in hydrogen partial pressure result in hydrogen absorption (secondary hydriding) localized in the axial direction at the distance apart from the rupture opening as is well known from preceding studies. In order to understand the effect of cladding microstructural changes on mechanical property of a fuel rod under LOCA conditions in a more precise and quantitative manner, the nanoindentation method has been applied to evaluation of mechanical properties of a cladding specimen after a LOCA simulated test; results for two samples taken from the rupture opening part and secondary hydriding part were compared with each other. The fraction of plastic work during the indentation was evaluated from the load-displacement curve in addition to hardness and Young's modulus. The plastic work fraction at the secondary hydriding part was found to be clearly lower than that at the rupture opening part and rather close to that in the ZrO and -Zr(O) layers, suggesting the significant ductility reduction of the secondary hydriding part despite its relatively low oxygen concentration.
Kakiuchi, Kazuo; Amaya, Masaki; Udagawa, Yutaka
Annals of Nuclear Energy, 171, p.109004_1 - 109004_9, 2022/06
Times Cited Count：4 Percentile：78.52(Nuclear Science & Technology)Collaborative Laboratories for Advanced Decommissioning Science; Osaka University*
JAEA-Review 2021-046, 77 Pages, 2022/01
JAEA-Review-2021-046.pdf:2.92MB
The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2020. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2018, this report summarizes the research results of the "Development of technology to simultaneously measure viscosity and surface tension of molten materials in reactor core" conducted from FY2018 to FY2020. Since the final year of this proposal was FY2020, the results for three fiscal years were summarized. Since (U, Zr)O and boride, molten materials in reactor core, exist at extremely high temperature, chemical reactions between the vessel and these molten materials are unavoidable. Therefore, it is difficult to measure the thermophysical property of these materials. In the present study, droplets are produced by heating and melting the samples levitated by a gas levitation method, then the droplets are collided with a substrate.
Takeshita, Hayato; Meigo, Shinichiro; Matsuda, Hiroki; Iwamoto, Hiroki; Maekawa, Fujio; Watanabe, Yukinobu*
JPS Conference Proceedings (Internet), 33, p.011045_1 - 011045_6, 2021/03
To improve accuracy of nuclear design of accelerator driven nuclear transmutation systems, nuclide production cross sections on Ni and Zr, which were candidate materials to be used in ADS, were measured for GeV energy protons. The measured results were compared with PHITS calculations and JENDL/HE-2007.
Aihara, Jun; Ueta, Shohei; Honda, Masaki*; Mizuta, Naoki; Goto, Minoru; Tachibana, Yukio; Okamoto, Koji*
Journal of Nuclear Science and Technology, 58(1), p.107 - 116, 2021/01
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)The concept of a Pu-burner high temperature gas-cooled reactor (HTGR) has been proposed for purpose of more safely reducing amount of recovered Pu. This concept employs coated fuel particles (CFPs) with ZrC coated PuO-YSZ kernel and with tristructural (TRISO) coating for very high Pu burn-up and high nuclear proliferation resistance. In this report, we investigate the microstructure of the region that includes the surface of an as-fabricated CeO-YSZ kernel simulating PuO-YSZ kernel. We found both Zr-rich grains and Ce-rich grains to be densely distributed in that region including surface of CeO-YSZ kernel. On the other hand, it has been reported that there was a porous region near surface of the CeO-YSZ kernel of Batch I. This finding confirms that Ce-rich grains near surface of CeO-YSZ kernels coated with ZrC layers have been corroded during the deposition of the ZrC layer, whereas the Zr-rich grains were hardly affected.
Zr and Mo in concrete rubbleDo, V. K.; Furuse, Takahiro; Murakami, Erina; Aita, Rena; Ota, Yuki; Sato, Soichi
Journal of Radioanalytical and Nuclear Chemistry, 327(1), p.543 - 553, 2021/01
Times Cited Count：5 Percentile：65.59(Chemistry, Analytical)A new HCl-free chromatographic separation procedure has been developed for sequential separation of Zr and Mo from concrete matrices. Accordingly, Zr and Mo could be sensitively and selectively measured by ICP-MS/MS using ammonia reaction gas. The recoveries of greater than 90% for Zr and Mo from concretes could be achieved. The measurement condition was optimized for complete suppression of interferences from Nb and peak tailing from abundant isotopes of Zr and Mo in concrete matrices. The removal of interferences was verified by measurement of radio-contamination-free concretes used as a sample matrix blank. Method detection limits of 1.7 mBq g
and 0.2 Bq g were achieved for Zr and Mo, respectively, in the concrete matrices. The interference removal factor for Nb (equivalent to the decontamination factor in radiochemical separation) was of the order of 10
, and the abundance sensitivity was of the order of 10
, indicating that the developed method is reliable for verifying the presence of ultralow concentrations of Zr and Mo. The present method is suitable for the rapid assessment of Zr and Mo for radioactivity inventory of concrete rubble.
Collaborative Laboratories for Advanced Decommissioning Science; Osaka University*
JAEA-Review 2020-038, 41 Pages, 2020/12
JAEA-Review-2020-038.pdf:3.28MB
JAEA/CLADS had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project in FY2019. Among the adopted proposals in FY2018, this report summarizes the research results of the "Development of Technology to Simultaneously Measure Viscosity and Surface Tension of Molten Materials in Reactor Core" conducted in FY2019.
Arai, Yoichi; Watanabe, So; Ono, Shimpei; Nomura, Kazunori; Nakamura, Fumiya*; Arai, Tsuyoshi*; Seko, Noriaki*; Hoshina, Hiroyuki*; Hagura, Naoto*; Kubota, Toshio*
Nuclear Instruments and Methods in Physics Research B, 477, p.54 - 59, 2020/08
Times Cited Count：5 Percentile：45.45(Instruments & Instrumentation)Arai, Yoichi; Watanabe, So; Ono, Shimpei; Nomura, Kazunori; Nakamura, Fumiya*; Arai, Tsuyoshi*; Seko, Noriaki*; Hoshina, Hiroyuki*; Kubota, Toshio*
QST-M-23; QST Takasaki Annual Report 2018, P. 59, 2020/03
Ueta, Shohei; Mizuta, Naoki; Fukaya, Yuji; Goto, Minoru; Tachibana, Yukio; Honda, Masaki*; Saiki, Yohei*; Takahashi, Masashi*; Ohira, Koichi*; Nakano, Masaaki*; et al.
Nuclear Engineering and Design, 357, p.110419_1 - 110419_10, 2020/02
Times Cited Count：1 Percentile：12.16(Nuclear Science & Technology)The concept of a plutonium (Pu) burner HTGR is proposed to incarnate highly-effective Pu utilization by its inherent safety features. The security and safety fuel (3S-TRISO fuel) employs the coated fuel particle with a fuel kernel made of plutonium dioxide (PuO) and yttria stabilized zirconia (YSZ) as an inert matrix. This paper presents feasibility study of Pu burner HTGR and R&D on the 3S-TRISO fuel.
Collaborative Laboratories for Advanced Decommissioning Science; Osaka University*
JAEA-Review 2019-025, 36 Pages, 2020/01
JAEA-Review-2019-025.pdf:2.57MB
CLADS, JAEA, had been conducting the Center of World Intelligence Project for Nuclear Science/Technology and Human Resource Development (hereafter referred to "the Project") in FY2018. The Project aims to contribute to solving problems in nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2018, this report summarizes the research results of the "Development of Technology to Simultaneously Measure Viscosity and Surface Tension of Molten Materials in Reactor Core". Since (U,Zr)O and boride, molten materials in reactor core, exist at extremely high temperature, chemical reactions between the vessel and these molten materials are unavoidable. Therefore, it is difficult to measure the thermophysical property of these materials. In the present study, droplets are produced by heating and melting the samples levitated by a gas levitation method, then the droplets are collided with a substrate. From the instant behavior of the collision, a new technology to simultaneously derive the viscosity and surface tension will be developed.
Aihara, Jun; Goto, Minoru; Ueta, Shohei; Tachibana, Yukio
JAEA-Data/Code 2019-018, 22 Pages, 2020/01
JAEA-Data-Code-2019-018.pdf:1.39MB
Concept of Pu-burner high temperature gas-cooled reactor (HTGR) was proposed for purpose of more safely reducing amount of recovered Pu. In Pu-burner HTGR concept, coated fuel particle (CFP), with ZrC coated yttria stabilized zirconia (YSZ) containing PuO (PuO-YSZ) small particle and with tri-structural isotropic (TRISO) coating, is employed for very high burn-up and high nuclear proliferation resistance. ZrC layer is oxygen getter. On the other hand, we have developed Code-B-2.5.2 for prediction of pressure vessel failure probabilities of SiC-tri-isotropic (TRISO) coated fuel particles for HTGRs under operation by modification of an existing code, Code-B-2. The main purpose of modification is preparation of applying code for CFPs of Pu-burner HTGR. In this report, basic formulae are described.
Amaya, Masaki; Kakiuchi, Kazuo; Mihara, Takeshi
Proceedings of International Nuclear Fuel Cycle Conference / Light Water Reactor Fuel Performance Conference (Global/Top Fuel 2019) (USB Flash Drive), p.1048 - 1056, 2019/09
